| 1. General Results, most used to calculate the result |
A | name "gl.ecolint.ch" is subdomain, public suffix is ".ch", top-level-domain is ".ch", top-level-domain-type is "country-code", Country is Switzerland, tld-manager is "SWITCH The Swiss Education & Research Network", num .ch-domains preloaded: 2137 (complete: 245733)
|
A | Good: All ip addresses are public addresses
|
| Warning: Only one ip address found: gl.ecolint.ch has only one ip address.
|
| Warning: No ipv6 address found. Ipv6 is the future with a lot of new features. So every domain name should have an ipv6 address. See https://en.wikipedia.org/wiki/IPv6: gl.ecolint.ch has no ipv6 address.
|
A | Good: No asked Authoritative Name Server had a timeout
|
A | DNS: "Name Error" means: No www-dns-entry defined. This isn't a problem
|
A | Good: destination is https
|
A | Good - only one version with Http-Status 200
|
A | Good: one preferred version: non-www is preferred
|
A | Good: No cookie sent via http.
|
A | Good: HSTS has preload directive
|
| Warning: HSTS preload sent, but not in Preload-List. Never send a preload directive if you don't know what preload means. Check https://hstspreload.org/ to learn the basics about the Google-Preload list. If you send a preload directive, you should **immediately** add your domain to the HSTS preload list via https://hstspreload.org/ . If Google accepts the domain, so the status is "pending": Note that new entries are hardcoded into the Chrome source code and can take several months before they reach the stable version. So you will see this message some months. If you don't want that or if you don't understand "preload", but if you send a preload directive and if you have correct A-redirects, everybody can add your domain to that list. Then you may have problems, it's not easy to undo that. So if you don't want your domain preloaded, remove the preload directive.
|
| HSTS-Preload-Status: unknown. Domain never included in the Preload-list. Check https://hstspreload.org/ to learn some basics about the Google-Preload-List.
|
A | Good: Some urls with http status 200/404 have a complete Content-Type header (MediaType / MediaSubType + correct charset):0 complete Content-Type - header (2 urls)
|
| https://gl.ecolint.ch/ 159.100.242.171
|
| Url with incomplete Content-Type - header - missing charset
|
| https://gl.ecolint.ch/.well-known/acme-challenge/check-your-website-dot-server-daten-dot-de
|
| Url with incomplete Content-Type - header - missing charset
|
A | http://gl.ecolint.ch/ 159.100.242.171
| https://gl.ecolint.ch/
| Correct redirect http - https with the same domain name
|
| Info: Checking the ip addresses of that domain name not exact one certificate found. So it's impossible to check if that domain requires Server Name Indication (SNI).: Domain gl.ecolint.ch, 1 ip addresses.
|
B | No _mta-sts TXT record found (mta-sts: Mail Transfer Agent Strict Transport Security - see RFC 8461). Read the result of server-daten.de (Url-Checks, Comments, Connections and DomainServiceRecords) to see a complete definition. Domainname: _mta-sts.gl.ecolint.ch
|
| 2. Header-Checks (Cross-Origin-* headers are alpha - started 2024-06-05) |
A | gl.ecolint.ch 159.100.242.171
| Content-Security-Policy
| Ok: Header without syntax errors found: default-src 'self'; script-src 'self' 'unsafe-inline' 'unsafe-eval' https://browser.sentry-cdn.com https://gl.ecolint.ch https://gl2.ecolint.ch https://apis.google.com https://*.ecolint.ch; connect-src 'self' https://*.sentry.io https://errors.ecolint.io https://js.sentry-cdn.com; style-src 'self' 'unsafe-inline'; img-src 'self' data: blob:; font-src 'self'; frame-src 'self' https://*.google.com; object-src 'none'
|
A |
|
| Good: default-src directive only with 'none' or 'self', additional sources are blocked. font-src
|
A |
|
| Good: default-src without 'unsafe-inline' or 'unsave-eval'. font-src
|
E |
|
| Bad: No form-action directive found. Use one to limit the form - action - destinations. form-action is a navigation-directive, so default-src isn't used.
|
E |
|
| Bad: No frame-ancestors directive found. Use one to limit the pages allowed to use this page in frame / iframe / object / embed / applet. frame-ancestors is a navigation-directive, so default-src isn't used.
|
E |
|
| Bad: No base-uri directive found. Use one to limit the URLs which can be used in a document's <base> element. Because it's a document directive, default-src isn't used, so an own directive is required.
|
A |
|
| Good: object-src only with 'none' or 'self' found, no scheme, no other urls. That blocks object / embed / applet - elements.
|
F |
|
| Critical: script-src with 'unsafe-inline' or 'unsafe-eval' and without a nonce found. That's dangerous, don't use it. If you really need one of these unsafe directives, add a nonce.
|
A |
|
| Good: script-src without * and a scheme found.
|
A |
|
| Good: script-src without data: schema found. Why is this important? The data: schema allows hidden code injection. Insert <script src='data:application/javascript;base64,YWxlcnQoJ1hTUycpOw=='></script> in your page and see what happens.
|
A |
|
| Good: frame-src without data: defined or frame-src missing and the default-src used as fallback not allows the data: schema. That blocks hidden code injection. Insert <iframe src="data:text/html;charset=utf-8;base64,PCFET0NUWVBFIGh0bWw+PGh0bWw+PGJvZHk+PHA+YmVmb3JlPHNjcmlwdCB0eXBlPSJ0ZXh0L2phdmFzY3JpcHQiPmFsZXJ0KCdYU1MnKTwvc2NyaXB0PjxwPmFmdGVyPC9ib2R5PjwvaHRtbD4="></iframe> in your page and see what happens.
|
C |
|
| Info: default-src and some other fetch directives have the same list of values. Remove the other fetch directive, default-src is used as fallback. Directives to remove: font-src
|
A |
| X-Content-Type-Options
| Ok: Header without syntax errors found: nosniff
|
A |
| Referrer-Policy
| Ok: Header without syntax errors found: strict-origin-when-cross-origin
|
A |
| Permissions-Policy
| Ok: Header without syntax errors found: fullscreen=*, geolocation=(self), camera=(self), microphone=()
|
A |
| X-Frame-Options
| Ok: Header without syntax errors found: SAMEORIGIN
|
B |
|
| Info: Header is deprecated. May not longer work in modern browsers. SAMEORIGIN. Better solution: Use a Content-Security-Policy Header with a frame-ancestors directive. DENY - use 'none', SAMEORIGIN - use 'self'. If you want to allow some domains to frame your page, add these urls.
|
A |
| Expect-CT
| Ok: Header without syntax errors found: max-age=604800, report-uri="https://oak.ct.letsencrypt.org/2025h2"
|
B |
|
| Info: Header is deprecated. May not longer work in modern browsers. max-age=604800, report-uri="https://oak.ct.letsencrypt.org/2025h2"
|
A |
| X-Xss-Protection
| Ok: Header without syntax errors found: 1; mode=block
|
B |
|
| Info: Header is deprecated. May not longer work in modern browsers. 1; mode=block
|
B | gl.ecolint.ch 159.100.242.171
| Cross-Origin-Embedder-Policy
| Info: Missing Header
|
B | gl.ecolint.ch 159.100.242.171
| Cross-Origin-Opener-Policy
| Info: Missing Header
|
B | gl.ecolint.ch 159.100.242.171
| Cross-Origin-Resource-Policy
| Info: Missing Header
|
| 3. DNS- and NameServer - Checks |
A | Info:: 6 Root-climbing DNS Queries required to find all IPv4- and IPv6-Addresses of 4 Name Servers.
|
A | Info:: 6 Queries complete, 6 with IPv6, 0 with IPv4.
|
A | Good: All DNS Queries done via IPv6.
|
A | Good: Some ip addresses of name servers found with the minimum of two DNS Queries. One to find the TLD-Zone, one to ask the TLD-Zone.ns1.dnsimple.com (162.159.24.4, 2400:cb00:2049:1::a29f:1804), ns2.dnsimple-edge.net (199.247.153.53, 2620:111:8005::53), ns4.dnsimple-edge.org (199.247.155.53, 2620:111:8007::53), ns3.dnsimple.com (162.159.26.4, 2400:cb00:2049:1::a29f:1a04)
|
A | Good (1 - 3.0):: An average of 1.5 queries per domain name server required to find all ip addresses of all name servers.
|
A | Info:: 4 different Name Servers found: ns1.dnsimple.com, ns2.dnsimple-edge.net, ns3.dnsimple.com, ns4.dnsimple-edge.org, 4 Name Servers included in Delegation: ns1.dnsimple.com, ns2.dnsimple-edge.net, ns3.dnsimple.com, ns4.dnsimple-edge.org, 4 Name Servers included in 1 Zone definitions: ns1.dnsimple.com, ns2.dnsimple-edge.net, ns3.dnsimple.com, ns4.dnsimple-edge.org, 1 Name Servers listed in SOA.Primary: ns1.dnsimple.com.
|
A | Good: Only one SOA.Primary Name Server found.: ns1.dnsimple.com.
|
A | Good: SOA.Primary Name Server included in the delegation set.: ns1.dnsimple.com.
|
A | Good: Consistency between delegation and zone. The set of NS records served by the authoritative name servers must match those proposed for the delegation in the parent zone. Ordered list of name servers: ns1.dnsimple.com, ns2.dnsimple-edge.net, ns3.dnsimple.com, ns4.dnsimple-edge.org
|
A | Good: All Name Server Domain Names have a Public Suffix.
|
A | Good: All Name Server Domain Names ending with a Public Suffix have minimal one IPv4- or IPv6 address.
|
A | Good: All Name Server ip addresses are public.
|
A | Good: Minimal 2 different name servers (public suffix and public ip address) found: 4 different Name Servers found
|
A | Good: All name servers have ipv4- and ipv6-addresses.: 4 different Name Servers found
|
A | Good: Name servers with different Top Level Domains / Public Suffix List entries found: 4 Name Servers, 3 Top Level Domains: org, net, com
|
A | Good: Name Servers with different domain names found.: 3 different Domains found
|
A | Good: Name servers with different Country locations found: 4 Name Servers, 2 Countries: CA, US
|
A | Info: Ipv4-Subnet-list: 4 Name Servers, 2 different subnets (first Byte): 162., 199., 2 different subnets (first two Bytes): 162.159., 199.247., 4 different subnets (first three Bytes): 162.159.24., 162.159.26., 199.247.153., 199.247.155.
|
A | Good: Name Server IPv4-addresses from different subnet found:
|
A | Info: IPv6-Subnet-list: 4 Name Servers with IPv6, 2 different subnets (first block): 2400:, 2620:, 2 different subnets (first two blocks): 2400:cb00:, 2620:0111:, 3 different subnets (first three blocks): 2400:cb00:2049:, 2620:0111:8005:, 2620:0111:8007:, 3 different subnets (first four blocks): 2400:cb00:2049:0001:, 2620:0111:8005:0000:, 2620:0111:8007:0000:
|
A | Good: Name Server IPv6 addresses from different subnets found.
|
A | Good: Nameserver supports TCP connections: 2 good Nameserver
|
A | Good: Nameserver supports Echo Capitalization: 2 good Nameserver
|
A | Good: Nameserver supports EDNS with max. 512 Byte Udp payload, message is smaller: 2 good Nameserver
|
A | Good: Nameserver has passed 10 EDNS-Checks (OP100, FLAGS, V1, V1OP100, V1FLAGS, DNSSEC, V1DNSSEC, NSID, COOKIE, CLIENTSUBNET): 1 good Nameserver
|
| Nameserver doesn't pass all EDNS-Checks: ns1.dnsimple.com: OP100: no result. FLAGS: no result. V1: no result. V1OP100: no result. V1FLAGS: no result. DNSSEC: no result. V1DNSSEC: no result. NSID: no result. COOKIE: no result. CLIENTSUBNET: no result.
|
| Nameserver doesn't pass all EDNS-Checks: ns1.dnsimple.com / 162.159.24.4: OP100: ok. FLAGS: ok. V1: SOA NOT expected, but found, BADVER expected, NOERR found, Version 0 expectend and found. V1OP100: SOA NOT expected, but found, BADVER expected, NOERR found, Version 0 expectend and found, no OPT100 expected, no OPT100 found. V1FLAGS: SOA NOT expected, but found, BADVER expected, NOERR found, Version 0 expectend and found. DNSSEC: ok. V1DNSSEC: SOA NOT expected, but found, BADVER expected, NOERR found, Version 0 expectend and found. NSID: ok (67m68). COOKIE: ok. CLIENTSUBNET: ok.
|
| Nameserver doesn't pass all EDNS-Checks: ns1.dnsimple.com / 162.159.24.4: OP100: ok. FLAGS: ok. V1: SOA NOT expected, but found, BADVER expected, NOERR found, Version 0 expectend and found. V1OP100: SOA NOT expected, but found, BADVER expected, NOERR found, Version 0 expectend and found, no OPT100 expected, no OPT100 found. V1FLAGS: SOA NOT expected, but found, BADVER expected, NOERR found, Version 0 expectend and found. DNSSEC: ok. V1DNSSEC: SOA NOT expected, but found, BADVER expected, NOERR found, Version 0 expectend and found. NSID: ok (67m82). COOKIE: ok. CLIENTSUBNET: ok.
|
| Nameserver doesn't pass all EDNS-Checks: ns2.dnsimple-edge.net / 199.247.153.53: OP100: SOA expected and found, NOERR expectend and NOERR found, Version 0 expectend and found, NO OPT100 expected, OPT100 echoed. FLAGS: ok. V1: SOA NOT expected, but found, BADVER expected, NOERR found, Version 0 expected, Version greater 0 found. V1OP100: SOA NOT expected, but found, BADVER expected, NOERR found, Version 0 expected, Version greater 0 found, NO OPT100 expected, OPT100 echoed. V1FLAGS: SOA NOT expected, but found, BADVER expected, NOERR found, Version 0 expected, Version greater 0 found. DNSSEC: ok. V1DNSSEC: SOA NOT expected, but found, BADVER expected, NOERR found, Version 0 expected, Version greater 0 found. NSID: ok. COOKIE: ok. CLIENTSUBNET: ok.
|
| Nameserver doesn't pass all EDNS-Checks: ns2.dnsimple-edge.net / 2620:111:8005::53: OP100: SOA expected and found, NOERR expectend and NOERR found, Version 0 expectend and found, NO OPT100 expected, OPT100 echoed. FLAGS: ok. V1: SOA NOT expected, but found, BADVER expected, NOERR found, Version 0 expected, Version greater 0 found. V1OP100: SOA NOT expected, but found, BADVER expected, NOERR found, Version 0 expected, Version greater 0 found, NO OPT100 expected, OPT100 echoed. V1FLAGS: SOA NOT expected, but found, BADVER expected, NOERR found, Version 0 expected, Version greater 0 found. DNSSEC: ok. V1DNSSEC: SOA NOT expected, but found, BADVER expected, NOERR found, Version 0 expected, Version greater 0 found. NSID: ok. COOKIE: ok. CLIENTSUBNET: ok.
|
| Nameserver doesn't pass all EDNS-Checks: ns3.dnsimple.com / 162.159.26.4: OP100: ok. FLAGS: ok. V1: SOA NOT expected, but found, BADVER expected, NOERR found, Version 0 expectend and found. V1OP100: SOA NOT expected, but found, BADVER expected, NOERR found, Version 0 expectend and found, no OPT100 expected, no OPT100 found. V1FLAGS: SOA NOT expected, but found, BADVER expected, NOERR found, Version 0 expectend and found. DNSSEC: ok. V1DNSSEC: SOA NOT expected, but found, BADVER expected, NOERR found, Version 0 expectend and found. NSID: ok (67m52). COOKIE: ok. CLIENTSUBNET: ok.
|
| Nameserver doesn't pass all EDNS-Checks: ns4.dnsimple-edge.org / 199.247.155.53: OP100: SOA expected and found, NOERR expectend and NOERR found, Version 0 expectend and found, NO OPT100 expected, OPT100 echoed. FLAGS: ok. V1: SOA NOT expected, but found, BADVER expected, NOERR found, Version 0 expected, Version greater 0 found. V1OP100: SOA NOT expected, but found, BADVER expected, NOERR found, Version 0 expected, Version greater 0 found, NO OPT100 expected, OPT100 echoed. V1FLAGS: SOA NOT expected, but found, BADVER expected, NOERR found, Version 0 expected, Version greater 0 found. DNSSEC: ok. V1DNSSEC: SOA NOT expected, but found, BADVER expected, NOERR found, Version 0 expected, Version greater 0 found. NSID: ok. COOKIE: ok. CLIENTSUBNET: ok.
|
| Nameserver doesn't pass all EDNS-Checks: ns4.dnsimple-edge.org / 2620:111:8007::53: OP100: SOA expected and found, NOERR expectend and NOERR found, Version 0 expectend and found, NO OPT100 expected, OPT100 echoed. FLAGS: ok. V1: SOA NOT expected, but found, BADVER expected, NOERR found, Version 0 expected, Version greater 0 found. V1OP100: SOA NOT expected, but found, BADVER expected, NOERR found, Version 0 expected, Version greater 0 found, NO OPT100 expected, OPT100 echoed. V1FLAGS: SOA NOT expected, but found, BADVER expected, NOERR found, Version 0 expected, Version greater 0 found. DNSSEC: ok. V1DNSSEC: SOA NOT expected, but found, BADVER expected, NOERR found, Version 0 expected, Version greater 0 found. NSID: ok. COOKIE: ok. CLIENTSUBNET: ok.
|
A | Good: All SOA have the same Serial Number
|
A | Good: CAA entries found, creating certificate is limited: digicert.com is allowed to create certificates
|
A | Good: CAA entries found, creating certificate is limited: letsencrypt.org is allowed to create certificates
|
| 4. Content- and Performance-critical Checks |
A | Good: All checks /.well-known/acme-challenge/random-filename without redirects answer with the expected http status 404 - Not Found. Creating a Letsencrypt certificate via http-01 challenge should work. If it doesn't work: Check your vHost configuration (apachectl -S, httpd -S, nginx -T). Every combination of port and ServerName / ServerAlias (Apache) or Server (Nginx) must be unique. Merge duplicated entries in one vHost. If you use an IIS, extensionless files must be allowed in the /.well-known/acme-challenge subdirectory. Create a web.config in that directory. Content: <configuration><system.webServer><staticContent><mimeMap fileExtension="." mimeType="text/plain" /></staticContent></system.webServer></configuration>. If you have a redirect http ⇒ https, that's ok, Letsencrypt follows such redirects to port 80 / 443 (same or other server). There must be a certificate. But the certificate may be expired, self signed or with a not matching domain name. Checking the validation file Letsencrypt ignores such certificate errors. Trouble creating a certificate? Use https://community.letsencrypt.org/ to ask.
|
| https://gl.ecolint.ch/ 159.100.242.171
|
| Warning: https result with status 200 and size greater then 1024 Bytes without Compression found. Add Compression support (gzip, deflate, br - these are checked) so the html content is compressed.
|
| https://gl.ecolint.ch/ 159.100.242.171
|
| Warning: Https + http status 200 + Inline CSS / JavaScript found. Don't use inline CSS / JavaScript. These are compiled and re-used ressources, save these with a long Cache-Control max-age - header.
|
| https://gl.ecolint.ch/ 159.100.242.171
|
| Warning: Https result with status 200 found, Html-Content is too big. Should be max. 110 %. May contain inline CSS / JavaScript, too much comments or white space. Re-used ressources - create files with a long Cache-Control max-age header. Remove comments and white space.
|
A | Good: Every https connection via port 443 supports the http/2 protocol via ALPN.
|
| https://gl.ecolint.ch/ 159.100.242.171
|
| Critical: Some script Elements (type text/javascript) with a src-Attribute don't have a defer / async - Attribute. Loading and executing these JavaScripts blocks parsing and rendering the Html-Output. That's bad if your site is large or the connection is slow / mobile usage. Use "async" if the js file has only functions (so nothing is executed after parsing the file) or is independend. Use "defer" if the order of the scripts is important. All "defer" scripts are executed before the DOMContentLoaded event is fired. Check https://developer.mozilla.org/en-US/docs/Web/HTML/Element/script to see some details.: 4 script elements without defer/async.
|
| Warning: CSS / JavaScript found without Compression. Compress these ressources, gzip, deflate, br are checked. 4 external CSS / JavaScript files without Compression found - 1 with Compression, 5 complete
|
| Warning: CSS / JavaScript files with a missing or too short Cache-Control header found. Browsers should cache and re-use these files. 4 external CSS / JavaScript files without Cache-Control-Header, 0 with Cache-Control, but no max-age, 1 with Cache-Control max-age too short (minimum 7 days), 0 with Cache-Control long enough, 5 complete.
|
A | Good: All checked attribute values are enclosed in quotation marks (" or ').
|
A | Info: No img element found, no alt attribute checked
|
A | Good: Domainname is not on the "Specially Designated Nationals And Blocked Persons List" (SDN). That's an US-list of individuals and companies owned or controlled by, or acting for or on behalf of, targeted countries. It also lists individuals, groups, and entities, such as terrorists and narcotics traffickers designated under programs that are not country-specific. Collectively, such individuals and companies are called "Specially Designated Nationals" or "SDNs." Their assets are blocked and U.S. persons are generally prohibited from dealing with them. So if a domain name is on that list, it's impossible to create a Letsencrypt certificate with that domain name. Check the list manual - https://www.treasury.gov/resource-center/sanctions/sdn-list/pages/default.aspx
|
| https://gl.ecolint.ch/.well-known/acme-challenge/check-your-website-dot-server-daten-dot-de
| 2.513 seconds
| Warning: 404 needs more then one second
|
A | Duration: 140200 milliseconds, 140.200 seconds
|